Remco Products Limited

Remco CD ROM

Double Inlet

Remco ‘ladder’ strip construction impellers are manufactured from a continuous strip of formed blades which are ‘roll seamed’ and locked into the back plate on one side and the inlet ring on the other to provide a rigid, concentric impeller wheel. It is affixed to the motor shaft via a zinc plated hub with grub screw.

Our recently extended range of double inlet fan wheels reflects the most commonly requested sizes in the replacement market.Please ask Remco for the availability of other sizes if they are not shown here.

Diameter	Lengths Available
76	100
96	100
108	100	124	230
121	148	176
133	146	176	196	220	240
146	100	126	148	176	196	216	300
160	126	148	176	196	216
185	148	176	196	240
200	176	196	216
215	176	196	216	240	300
238	148	196	216	240	300
280	280*
320	320*

* DA280x280 & DA320x320 are made from galvanized steel and supplied with 25mm Bore as standard. 1/2" & 3/4" Bores are also available for these wheels

Direction of rotation looking from hub side.

Centrifugal Fan Wheels may be supplied with ‘Adaptor Sleeves` to adapt the hub to suit your application. Standard Bore sizes are:

5/8” - 1/2” - 7/16” - 3/8” - 5/16” - 1/4” - 3/16” - 16mm - 14mm - 12mm - 11mm - 10mm - 8mm - 6mm

Other sizes available on request.

BCF Fan Range

Ø133
Ø175
Ø190
Ø220
Ø225
Ø250