Remco Products Limited

The simplest of all motor types, they consist of two basic electrical assemblies: a single bobbin wound stator and a die cast rotor assembly. The auxiliary winding of the motor is provided by two coils of thick copper wire looped around each pole face.

These shading coils remain in circuit whilst the motor is running and oppose the main winding flux, resulting in lower motor efficiency.

Starting torque of this type of motor is influenced by the diameter of the shading coil. Higher start torque usually means lower running performance, and final design is usually a compromise between these two parameters.

General Specification

• Bearings

Either self-aligning sintered bronze impregnated with synthetic oil or ball bearings

• Construction

Pressure die cast bearing brackets with provision for direct mounting via M4 screws

• Types

Shaded Pole

• Output

1 - 18 Watts

• Poles

2 Pole

• Enclosure

Open Frame

• Insulation

Class B,F & H available

• Rating

Continuously rated air-over motor or continuous mechanical duty

• Speeds

Single speed standard. Two speeds available

• Shaft

ENIA steel, single or double extension

• Rotation

Clockwise (CW) or AntiClockwise (ACW)

• Supply

Single Phase 115/120v & 220/240v, 50Hz

Note: General 24 Range motor specification only. Refer to individual models or Sales Office for particular details and further information if required.

The performance characteristics of skeleton motors dictate that they are generally used for air movement or liquid stirring duties. Their simple compact construction, quiet operation and low cost make them ideally suited for these applications

• Oil, Gas and Solid Fuel Fan Flues
• Fan Assisted Domestic Boilers
• Commercial Fan Convectors
• Domestic Fan Heaters
• Kick space Heaters
• Drinks Dispensers
• Beer Coolers
• Frost Free Freezers

View our 24 Range Motors here

Please phone 01243 528414 for drawings and prices.