Remco Electric Motors
Remco Products Limited
HVAC Replacement Electric Motors and Fans
Suppliers of Replacement Electric Motors and Fans to the Heating, Ventilation, Refrigeration & Air Conditioning industries
 
Used for starting & running of single phase motors. Manufactured from self-healing metallised polypropylene film with case in either self-extinguishing plastic resin material or plastic sleeved aluminium
General Characteristics

Applications -

 A.C. use, starting and running of single phase motors etc.
Construction -
 Self healing metallized polypropylene film. Low losses non inductive winding.
Protection -
Case and sealing cover in self extinguishing plastic resin material.
Terminals -
6.3 mm single 'Faston' type (up to 4mfd or double 'Faston' type 5mfd and above).
Mounts -
Via integral stud or clips.
(Nut & Lockwasher supplied.)
Technical Characteristics

Reference Standards :

VDE 560 - DIN40040
Climatic Category :
40/70/21
Operating Class :
DIN 40040 Standards (February
1973 Edition). HSF/QV - HSF/PU
Temperature :
Lower Limit = - 25 °C
Upper Limit = + 70 °C
Ambient = + 35 °C
Relative Humidity :
Maximum Value 95% (30 days per year max; then max R.H. = 85%)
Average Value 75 %
Acceptable Condensation :
None

Expected Life :

3,000 hours @ 450 volts CL.C
10,000 hours @ 400 volts CL.B
Failure Rate :
Maximum 3% (On rated service and at upper temperature limit)
Capacitance Tolerance :
± 5%
Rated Voltage :
400/450 volts
Working Frequency Range :
50/60 HZ
Category Voltage :
1.1 UR
Test Voltage :
Between terminals : 2.15 UR for 2 seconds
Between terminals and case : 3 KV for 1 second
Dissipation Factor :
< 20.10-4 @ 20°C, V =- UR , 50HZ
Tel: 01243 528414
Fax: 01243 532127
Email: sales@remco.co.uk